What is the processing method and processing condition of roller burnishing tool?

What is the processing method and processing condition of roller burnishing tool?

The rolling process is to contact the high hardness and smooth roller with the metal surface, after the local microplastic deformation of the surface layer, the surface roughness is improved by plastic machining. Roller burnishing tool, also called roller burnishing surface finish, rolling cutter, rolling head, finish roller, tool roller,  surface roller, rolling squeeze head and roll extrusion head, mirror tools, rolling tool, roll to squeeze knife,  rolling reamer, cutter roller, burnishing drill such as a variety of names. Because...

Weiterlesen

The structure and characteristics of double rod roller burnishing tool.

roller burnishing tool, burnishing process, burnishing operation, burnish technologies, internal roller, finish roller

(figure 1)   As shown in figure 1, the structure of double rod roller burnishing tool: Lathe tool cutter bar Rolling cutter bar artifacts rest pin Adjust the bolt   1. Good rigidity. When using the double rod roller burnishing tool, the two tool bars are clamped on the square tool holder, and the overhanging length L can be adjusted according to the workpiece size. Therefore, it can greatly improve the rigidity of the pole.   2. Adjustment and control...

Weiterlesen